Maverick Arms has discovered that a small number of Maverick Hunter Over/Under 12-gauge shotguns (SKU 75445) have been marked incorrectly. The chamber marking indicates that these shotguns are chambered for 3½-inch shells; however, the chambers are manufactured for 2 ¾-inch and 3-inch shells. All Maverick Hunter shotguns are manufactured with 3-inch chambers, not 3½-inch chambers. Firing 3½-inch shotshells through these shotguns may cause an increase in chamber pressure, which may result in damage to your shotgun and/or severe personal injury, if a barrel should rupture as a result of excess pressure.
How to Determine if Your Shotgun is Affected: Each Maverick Hunter shotgun is marked with a chamber designation on the right side of the barrel, just below the safety warning. If your shotgun marking reads “12 Ga 3½” Maverick Hunter,” then your shotgun IS affected by this recall. Discontinue use of this shotgun and immediately follow the instructions provided below.
What to Do If Your Shotgun is Affected: DO NOT fire 3½-inch shotshells through your Maverick Hunter Over/Under shotgun.
Please call the Product Service Center at (800) 363-3555 between the hours of 8:00 AM – 4:30PM EST or email us at [email protected] to confirm that your shotgun is covered by this recall.
If your shotgun is covered by this recall, Maverick Arms will provide a prepaid shipping label for your current shotgun, for return to an authorized Maverick Service Center.
Once we receive your shotgun, Maverick will provide a free replacement shotgun of the same model and type (SKU 75445).
If you have already sold or otherwise disposed of your Maverick Hunter shotgun, we request that you immediately provide us with the contact information of the purchaser so that we may contact them directly and provide information about this recall.
Questions: For questions about this safety warning and product recall, or to confirm if your shotgun is affected by this recall, please contact the Product Service Center at (800) 363-3555.
*Note that only a small number of SKU 75445 shotguns are affected. No other Maverick or Mossberg models are affected by this Safety Warning or Recall Notice.
Ruger has issued an Important Ruger Product Safety Bulletin on their Precision Rifle. Clink the link below for full details.
We have checked the serial #’s of the guns we have sold and none are subject to this issue.
https://ruger.com/dataProcess/rprSafety/
EVERY Ruger Mark IV Mfg. before June 1, 2017 is subject to this recall. Below is a link to a PDF describing the issue and another link to the recall website:
PDF:
http://ruger-hosted.s3.amazonaws.com/email/MarkIV-Recall-Bf28Cz9s46H8.pdf
Website:
https://ruger.com/dataProcess/markIVRecall/index.php?r=y
If you purchased a Daniel Defense rifle From Parker Arms your serial # has been checked and your rifle is NOT subject to the recall. Please feel free to recheck at the link below. Also the full letter from DDI.
https://danieldefense.com/safety
DISCONNECTOR SAFETY NOTIFICATION
Daniel Defense is committed to the highest level of quality and safety. In keeping with that commitment we are issuing a safety notification related to a condition we identified with the Disconnector in the Fire Control Group. This safety notification applies to certain firearms manufactured between April 1, 2016 and March 3, 2017. In a few cases, a double fire condition has occurred with a single pull of the trigger. In the Company’s spirit to always do the right thing, Daniel Defense will correct any and all potential conditions at no cost to the consumer as part of our 100% Satisfaction Guarantee.
Does This Safety Notification Apply to My Firearm?
Daniel Defense firearms containing a single-stage Fire Control Group, manufactured between April 1, 2016 and March 3, 2017, MAY fall within the scope of this Safety Notification.
This is an important Safety Notification and should be followed by all owners of Daniel Defense firearms.
FOLLOW THIS LINK TO CHECK YOUR SERIAL #:
https://danieldefense.com/safety
Let me first say that if you purchased a Remington 887 shotgun from Parker Arms & Gunsmithing your firearm is not affected by this recall. I have checked our records and verified the serial #’s of the 887″s sold here. The 887’s sold here DO NOT fall into the recall group.
If you purchased an 887 elsewhere, or know of someone with a Remington 887, STOP using it immediately until you go to the link below and check the serial #.
PRODUCTS: Remington is voluntarily recalling Remington Model 887™ shotguns manufactured from December 1, 2013 to November 24, 2014. Link to Serial # checker below: http://887recall.remington.com/ Link to Notification below: http://887recall.remington.com/pdfs/Notification-Model-887.pdf
