S&W M&P SHIELD® EZ® PISTOL IMPORTANT SAFETY RECALL NOTICE

S&W has announced a recall on some of its M&P Shield EZ Pistols.

If you purchased an EZ pistol from Parker Arms we has checked the serial # with S&W and your pistol is not affect or we have contacted you to help with the recall process.

Here is the link to the full info and serial # checker:

https://www.mpshieldezrecall.com/

M&P SHIELD® EZ® PISTOL IMPORTANT SAFETY RECALL NOTICE FOR PISTOLS MANUFACTURED BETWEEN MARCH 1ST, 2020 AND OCTOBER 31ST, 2020

Smith & Wesson has identified two M&P Shield EZ Pistols on which the hammers manufactured by our supplier were cracked.  In those firearms, the hammer failed to fully engage the sear, causing the round to fire, cycling the slide, and potentially resulting in multiple discharges without depressing the trigger.  This issue can occur in the following two scenarios:

​

  1. With a loaded magazine in the firearm and the grip safety depressed, releasing the slide (by pulling it back, or releasing the slide stop), may ignite the round as the slide closes, without engaging the trigger.  The condition may occur, regardless of the manual thumb safety position if equipped.  This may also result in multiple discharges.
     

  2. With a loaded magazine in the firearm, the grip safety depressed, manual safety in the fire position, slide closed, and a round in the chamber, pulling the trigger will cause the round to fire normally, however as the slide cycles, the next round may be ignited as it is chambered by the hammer failing to fully engage the sear, causing multiple discharges.

 

In all cases, the firearm will NOT fire unless the grip safety is depressed.  While this condition has been found only in two hammers, and our investigation suggests that these two incidents are very isolated, any unintended discharge of a firearm has the potential to cause injury.  Therefore, we have established this Safety Recall as a precautionary measure to ensure that all M&P Shield EZ Pistols in service meet our design specifications. 

 

Stop using your M&P® Shield™ EZ pistol until you determine whether it is included in this safety recall, and if so, until it has been inspected and repaired by Smith & Wesson, if necessary.